wiki:MessageStandardization

Context Navigation

Version 28 (modified by MilenaN, 13 years ago) ( diff )
fix message

Message Standardization

How should Errors/Warnings/Messages be formatted

Only user derived variables should be bracketed, not GRASS derived variables, for example:

 Yes: Creating raster map <%s>.  Pass 1 of 7 ...
 No:  Creating <raster> map <%s>.  Pass [1] of [7] ...

strings < > - raster, vector maps, group names, etc., e.g.
- Raster map <%s> not found
strings ' ' - paths, SQL queries, etc., e.g.
- File '%s' not found
- Unable to create table: '%s'

Discussion

The [bracketed] parenthetical disrupts the flow of the phrase and doesn't help enhance clarity of meaning. IMHO, this reads better without [] brackets: "Line %d deleted." [] Brackets should be used when value is outside of the phrase: "Unknown line [%d]". --HB

Statistics

symbol	number of code lines (2007-04-11)	2008-02-14 (6.3svn)	2009-08-02 (7.0svn)
<%s>	637	1406	1935
[%s]	690	427	222
'%s'	354	370	537
<%d>	12	7	11
[%d]	207	13	137
'%d'	3	1	1

TYPES="<%s> \[%s\] '%s' <%d> \[%d\] '%d'"

for TYPE in $TYPES ; do
  NUM_HITS=`grep -rI "$TYPE" * | grep -v '/.svn/\|^dist.i686-\|locale/po/' | wc -l`
  echo "$TYPE  $NUM_HITS"
done

Macros to be defined for C library

MSG_RASTER_NOT_FOUND_IN_MAPSET - "Raster map <%s> not found in <%s>"
MSG_CANNOT_OPEN_RASTER - "Unable to open raster map <%s>"
MSG_CANNOT_OPEN_FILE - Unable to open file <%s>

Note: Problem with xgettext package. How to use macros to work with xgettext?

Standard messages sandbox

First letter should be capitalized
Use the present tense
(cannot instead of could not; better: unable to; even better: avoid the issue altogether by rewording like "File not found.")
Avoid contractions (cannot instead of can't)
Good sentence construction
("Cannot find input map <%s>" instead of "It could not be find input map <%s>"; possibly better: "Input map <%s> not found.")
Be consistent with periods. Either end all phrases with a period or none. Without periods the translators save also some time
Complete sentences or all parts of a message with multiple sentences should end with periods. Short phrases should not. Punctuated events, such as errors, deserve a period. e.g. "Operation complete." Phrases which imply ongoing action look odd if missing an ellipse or any other form of punctuation. Phrase != Sentence. --HB
Either all module descriptions should end with periods or not. As some are multi-sentence, and thus should end in a period for consistency within the message, so probably they all should end in one. Currently by my count 237 end with '.', 139 do not. In the multi-sentence case it may be posible to put the simple description in the module->label field and additional explanitory text into the ->description field.
option and flag descriptions generally should not end in a period (more likely to be phrases than sentences). But they can suffer the same multi-sentence period problem as module descriptions. In this case splitting out additional text into a ->label, ->description split may help.
Suspension points used to indicate some process is being done should be placed next to last word, without space. e.g.
```
Reading raster map...
```
instead of
```
Reading raster map ...
```
HB: FWIW & my 2c, 1) to me keeping the space before the ellipse looks better, is this a purely cosmetic choice or is there some style logic? [wikipedia article on the ellipse was cited on grass-dev, I would argue that refers to printed typeset text not monospace terminal text, strangely suggests punctuation+3 dots (....), is just one other guy's opinion, and I'm still not swayed] 2) these messages may be good candidates for G_verbose_message().
HB 2c more: (i.landsat.rgb example)
```
  Processing <$i>...
 
  Processing <$i> ...
```
The version with the space just looks better. The version without just looks wrong. But when the line ends with a word, no-space doesn't look that bad: (v.in.ascii)
```
  Importing points...
 
  Importing points ...
```
Module descriptions should use all the same verbal tense. Currently some of them can be found in infinitive and others in present.

DB messages

db_open_database(), db_start_driver_open_database()

Unable to open database <%s> by driver <%s>

db_execute_immediate()

Unable to insert new record: '%s'

Unable to create table: '%s'

Unable to drop table: '%s'

db_grant_on_table()

Unable to grant privileges on table <%s>

db_start_driver()

Unable to start driver <%s>

db_describe_table()

Unable to describe table <%s>

db_select_value()

Unable to select record from table <%s> (key %s, column %s)

No records selected from table <%s>

db_fetch()

Unable to fetch data from table <%s>

db_create_index(), db_create_index2()

Unable to create index for table <%s>, key <%s>

db_copy_table(), db_copy_table_by_ints()

Unable to copy table <%s>

db_delete_table()

Unable to delete table <%s>

db_table_exists()

Unable to find table <%s> linked to vector map <%s>

db_get_column()

Column <%s> not found in table <%s>

db_list_tables()

Unable to get list tables in database <%s>

db_open_select_cursor()

Unable to open select cursor: '%s'

db_create_table()

Unable to create table <%s>

db_get_num_rows()

Unable select records from table <%s>

General messages

G_legal_filename()

<%s> is an illegal file name

G_set_window()

Invalid graphics coordinates

Unable to set region

D_do_conversions()

Error calculating graphics-region conversions

G_tempfile()

Unable to open temporary file <%s>

G_get_projinfo()

Unable to get projection info of raster map

G_get_projunits()

Unable to get projection units of raster map

Raster messages

G_find_raster2()

Raster map <%s> not found

Raster map <%s> not found in the current mapset

Raster map <%s> not found in mapset <%s>

Rast_open_old() [in GRASS 6: G_open_cell_old()]

Unable to open raster map <%s>

Rats_open_new [in GRASS 6: G_open_cell_new()]

Unable to create raster map <%s>

Rast_close() [in GRASS 6: G_close_cell()]

Unable to close raster map <%s>

Rast_get_cellhd() [in GRASS 6: G_get_cellhd()]

Unable to read header of raster map <%s>

Rast_get_row() [in GRASS 6: G_get_raster_row()]

Unable to read raster map <%s> row %d

Rast_put_row() [in GRASS 6: G_put_raster_row()]

Failed writing raster map <%s> row %d

Rast_write_cats [in GRASS 6: G_write_cats()]

Unable to write category file for raster map <%s>

Rast_read_colors() [in GRASS 6: G_read_colors()]

Unable to read color file of raster map <%s>

Rast_read_cats() [in GRASS 6: G_read_cats()]

Unable to read category file of raster map <%s>

Rast_fp_range() [in GRASS 6: G_read_fp_range()]

Unable to read fp range of raster map <%s>

Rast_read_range() [in GRASS 6: G_read_range()]

Unable to read range of raster map <%s>

3D raster messages

G_find_grid3()

3D raster map <%s> not found

3D raster map <%s> not found in the current mapset

3D raster map <%s> not found in mapset <%s>

G3d_openCellOld()

Unable to open 3D raster map <%s>

G3d_range_load()

Unable to read range of 3D raster map <%s>

G3d_closeCell()

Unable to close 3D raster map <%s>

Vector messages

G_find_vector2()

Vector map <%s> not found

Vector map <%s> not found in the current mapset

Vector map <%s> not found in mapset <%s>

Vect_open_old()

Unable to open vector map <%s>

Unable to open vector map <%s> at topology level %d

Vect_open_new()

Unable to create vector map <%s>

Vect_get_field(), Vect_get_dblink()

Database connection not defined for layer %d

Vect_get_area_centroid()

Area %d without centroid or Skipping area %d without centroid

Vect_open_old_head()

Unable to open header file of vector map <%s>

Vect_map_add_dblink()

Unable to add database link for vector map <%s>

Vect_read_next_line

Unable to read vector map <%s> feature id %d

Discussion

"Map <roads> in <user1>" or "Map <roads@user1>"
- "Map <roads@user1>" preferred - [[User:Landa|ML]]
- If the element was given on the command line, the user knows which mapset it came from, and the @mapset part is just extra noise. If the element is taken from the data (how? i.group?) where the user hasn't explicitly defined the map, then @mapset it appropriate. Also output maps are always created in the current mapset* so @mapset is redundant and should not be used for new maps. [* i.rectify, r.in.gdal, v.in.ogr are exceptions that can create maps in other mapsets or new locations] --HB

Proposed standard responses in bold.

G_get_raster_row()
"Unable to read raster map <%s> row %d"

Cannot get raster raster of input map
Cannot raster raster of input map
Cannot read raster row [%d]
can't read row in input elevation map
Could not read from <%s>
Could not read from <%s>, row=%d
Error getting input null cells
error reading hue data
Error reading 'hue' map
Error reading input
error reading intensity data
Error reading 'intensity' map
Error reading map %s
Error reading row of data
error reading saturation data
Error reading 'saturation' map
G_get_raster_row failed
reading map
Reading map
Reading row %d
read_row: error reading data
%s: Unable to read raster map [%s]
Unable to get row %d from raster map
Unable to get row %d from <%s>
Unable to read map raster row %d
Unable to read raster row.
Unable to read raster row %d
Unable to read row %i\n

G_put_raster_row()
"Failed writing raster map <%s> row %d"

Cannot write row to raster map
Cannot write to <%s>
Error while writing new cell map.
Error writing cell map during transform.
error writing data
Error writing output map
G_put_raster_row failed (file system full?)
%s - ERROR writing %s
Unable to properly write output raster map
unable to write map row %d

G_open_cell_new()
"Unable to create raster map <%s>"

Cannot open output raster map <%s>
can't open %s
Error in opening output file <%s>
Unable to create output <%s>
Unable to create raster map <%s>
Unable to create raster map [%s]
Unable to open cell map <%s> for output.\n
Unable to open output file.
Unable to open the cell map MASK.

G_open_cell_old()
"Unable to open raster map <%s>"

Cannot find map %s
Cannot find mapset for %s
Cannot open File %s
Cannot open input raster map <%s>
Cannot open map %s
Cannot open raster map
Cannot open raster map <%s>
Cannot open raster map [%s]
Cannot open raster map [%s]!
Cannot open %s
Cannot open seed map <%s@%s>!
Cannot open terrain raster map <%s@%s>!
Can't open input map
can't open raster map [%s]
can't open raster map <%s> in mapset %s
can't open %s
Could not open raster <%s>
Could not open raster '%s'
Error in opening input file <%s>
Not able to open cellfile for [%s]
Problem opening input file [%s]
Raster file <%s> not found
Raster map [%s] not found  
<%s> cellfile not found
%s: Couldn't open raster <%s@%s>
%s: o_open_file: could not open raster map %s in %s
Unable to open band files.
Unable to open cellfile for [%s]
Unable to open map <%s>
Unable to open MASK
Unable to open raster map [%s]
Unable to open raster <%s>
unable to open [%s] in [%s]
Unable to proceed

G_find_raster()
"Raster map <%s> not found"

albedo raster map <%s> not found
aspin raster map <%s> not found
Cannot find map %s
Cannot find mapset for %s
Cannot find raster map
Cannot find %s
cell file [%s] not found
coefbh raster map <%s> not found
elevin raster map <%s> not found
Input map [%s] in location [%s] in mapset [%s] not found.
latin raster map <%s> not found
linkein raster map <%s> not found
No clump map specified and MASK not set.
Raster file [%s] not found. Exiting.
Raster map [%s] already exists.\nPlease try another.
Raster map <%s> not found
Raster map [%s] not found
Raster <%s> already exist.
Raster <%s> not found
Raster '%s' not found
Requested raster map <%s> not found
[%s] cannot be found!
%s - exits in Mapset <%s>, select another name
slopein raster map <%s> not found
%s: more than %d files not allowed
%s - not found
%s: o_open_file: raster map %s not found
%s: <%s> raster map not found
%s: %s - raster map not found
%s: %s - Unable to find the imaginary-image.
%s: %s - Unable to find the real-image map.
stringliteral
Training map [%s] not found.
Unable to find base map <%s>
Unable to find cell map <%s>
Unable to find cover map <%s>
Unable to find file [%s].
Unable to find input cell map <%s>

G_find_raster2()
"Raster map <%s> not found"

Raster map <%s> not found in current mapset
Raster map <%s> not found
Raster file [%s] not found. Exiting.

G_find_vector()
"Vector map <%s> not found"

Cannot find vector map
Could not find input map <%s>
Could not find input map <%s>.
Could not find input map '%s'.
Could not find input map <%s> in current mapset.
Could not find input map <%s>\n
Could not find input %s
Could not find input %s\n
Could not find input vector map <%s>
Could not find input vector map %s
Could not find network input map '%s'.
Could not find vector map <%s> in current mapset

G_tempfile()
"Unable to open temporary file <%s>"

Unable to write the temporary file   
Unable to open temp file.            
Unable to open tempfile              
Unable to open temporary file <%s>

Systematic Approach

Collect all possible error states from functions
assign error codes for macros?
G_option() parameters (like output->description = ("Path to resulting ASCII file");)

Note: Would be possible to conctretize your ideas? (MartinL)

Parameters and flags

Fix the parameters and flags. Make it a concept. See proposal(s)

Verbosity levels

Current abstract concept

type	GRASS_VERBOSE	libgis	command line	result	libgis fn
verbose	3	MAX_LEVEL	--verbose	print progress and all messages messages	G_verbose_message()
standard	2	STD_LEVEL		print progress and selected messages	G_message()
brief	1			print only progress information (% done)	G_percent(), G_clicker(), G_important_message()
quiet	0	MIN_LEVEL	--quiet	print nothing (only ERRORs and WARNINGs)	G_warning(), G_fatal_error()
debug		0-5		print debug message at DEBUG level set with g.gisenv	G_debug(#, "")
mute	-		2>&1 > /dev/null	only for use in rare occasions

Proposal

module output (should be "parsable") is not controlled by GRASS_VERBOSE [use fprintf (stdout, ...)]
quiet
only warnings and fatal errors are printed
brief
all G_percent() and G_important_message() (especially connected to progress information??)
standard
all G_percent() and selected G_message()
verbose
all G_percent() + G_message() + G_verbose_message()

Modification

remove verbose level → standard == all G_percent () + G_messages()
why?? --HB
remove "--verbose" from help pages, manually mention where it does work.
it only does something in a few modules
move some messages to G_debug()
move some messages to G_verbose_message()
move some messages to G_important_message()
change level numbers to 1, 3, 5
Add new G_msg(int level, "%format", ...); lib function. Existing G_message() could stay and would be the same as G_msg(LEVEL_STD,...).

Discussion

HB: I'm quite happy to leave the current system as it is, but use GRASS_MESSAGE_FORMAT=silent to switch off G_percent(),G_clicker() output.
Mixing a sliding verbosity scale plus a binary switch or >= rule for when G_percent() happens in the same variable is very messy IMO.

Alternative abstract concept

(Binary method, 3=1+2)

How to deal with --verbose messages? add levels 4 (vmsg+msg) and 5(vmsg+msg+progress) ?

standard	3	PERMSG_MODE	print progress and messages
standard	2	MESSAGE_MODE	print only messages
brief	1	PERCENT_MODE	print only progress information
silent but not mute	0	QUIET_MODE	print nothing (but ERR and WAR)
mute	2>&1 > /dev/null

Note: See TracWiki for help on using the wiki.

Download in other formats:

Plain Text

Context Navigation

Table of Contents

Message Standardization

How should Errors/Warnings/Messages be formatted

Discussion

Statistics

Macros to be defined for C library

Standard messages sandbox

DB messages

General messages

Raster messages

3D raster messages

Vector messages

Discussion

Systematic Approach

Parameters and flags

Verbosity levels

Current abstract concept

Proposal

Modification

Discussion

Alternative abstract concept

Download in other formats: