Vertical Coordinate Systems and Datums

This page attempts to codify how vertical datums and vertical coordinate systems ought to be described in GeoTIFF files, and in the geotiff tags used by LAS format.

Vertical CS in GeoTIFF

The planned approach is to store vertical coordinate system in GeoTIFF tags. The GeoTIFF specification has always had vertical coordinate system support, tied to the EPSG codes for vertical coordinate systems and datums. However, traditionally, the vertical coordinate system support in GeoTIFF has also not been widely used. So it is hoped that formalization of GeoTIFF tags for vertical datums in LAS format would also apply for GeoTIFF in general and any other geotiff oriented formats (GeoJP2 for instance). It is anticipated that the GeoTIFF representation of a LAS file with a vertical datum set might look something like this:

    Geotiff_Information:
       Version: 1
       Key_Revision: 1.0
       Tagged_Information:
          End_Of_Tags.
       Keyed_Information:
          GTModelTypeGeoKey (Short,1): ModelTypeProjected
          GTRasterTypeGeoKey (Short,1): RasterPixelIsPoint
          ProjectedCSTypeGeoKey (Short,1): PCS_WGS84_UTM_zone_15N
          ProjLinearUnitsGeoKey (Short,1): Linear_Meter
          VerticalCSTypeGeoKey (Short,1): Unknown-5701
          VerticalCitationGeoKey (Ascii,7): "Newlyn"
          VerticalDatumGeoKey (Short,1): Unknown-5101
          VerticalUnitsGeoKey (Short,1): Linear_Meter
          End_Of_Keys.
       End_Of_Geotiff.

Note that VerticalCSTypeGeoKey 5701 is "ODN height", a vertical coordinate system from the EPSG coordinate reference system table. The vertical coordinate system 5701 is based on vertical datum 5101 (Ordnance Datum Newlyn) from the EPSG datum table. The 5701 vertical coordinate system also specifies use of meters as the vertical linear measure.

So there are four GeoTIFF tags related to vertical coordinate system information:

• VerticalCSTypeGeoKey: an EPSG coordinate system code of type vertical (normally 5600-5799).
• VerticalCitationGeoKey: a description of the vertical coordinate system, often the EPSG user name for the VerticalCS.
• VerticalDatumGeoKey: An EPSG vertical datum code (normally 5000 to 5299).
• VerticalUnitsGeoKey: An EPSG units code (normally 9000 to 9199, 9001=meter)

Interesting things to note:

• There does not appear to be a VerticalUnitSizeGeoKey allowing user defined vertical units similarly to the ProjLinearSizeGeoKey, so it is not appropriate to use KvUserDefined for VerticalUnitsGeoKey.
• The libgeotiff epsg_vertcs.inc file seems to imply that the vertical datum codes in the range 5000 to 5299 should be considered vertical coordinate systems which they are not in the EPSG data model. It is not clear whether this is something that changed in the EPSG data model after the initiation of the GeoTIFF specification, or if it was an error by the GeoTIFF/libgeotiff authors. This mismatch is why Unknown-5101 above is not reported as Newlyn directly. Spec issue reported at ​http://trac.osgeo.org/geotiff/ticket/24
• The EPSG and OGC models include an EPSG code for a composite coordinate system. The composite coordinate system is a collection of a horizontal coordinate system (like PCS_WGS84_UTM_zone_15N) and a vertical coordinate system (like 5701 - ODN height). An example is ​EPSG:7405 - OSGB36 / British National Grid + ODN. There is no way to represent this in a GeoTIFF tag.

Related Resources

• ​liblas preliminary Vertical CS proposal
• ​PROJ.4 Vertical Datum Info