Fedora build with cmake:

Author: David Burken

Last modified: 24 November 2011

Feedback welcome. Please send to the ossim mailing list at "ossim-developer AT lists.sourceforge.net" and reference this page.

Note: Unix commands start with $, anything else will be notes, comments. If you see a $ <some_command> The part after slash slash is a comment.

Getting the packages you need with yum:

After doing a fresh desktop install of Fedora these are some packages I usually need:

sudo yum install ant ant-contrib ant-manual autogen automake autoconf boost boost-devel cmake cppunit cppunit-devel cvs gcc-c++ byacc expat-devel fftw flex git subversion libjpeg-turbo-devel freetype freetype-devel  fftw-devel  java-1.6.0-openjdk-devel libcurl-devel libcurl libpng-devel libpng libtool libXmu libXmu-devel minizip-devel podofo podofo-devel qt qt-devel swig thunderbird xemacs xemacs-common xemacs-info.noarch xemacs-packages-base.noarch xemacs-packages-extra-info.noarch xemacs-packages-extra.noarch yasm yasm-devel zlib-devel

Environment variables
I put my build environment in a separate file that I source. I do this because I have more than one workspace, i.e. osgeo, geoeye, geoeye-dev. This is a snip from ossimrc-osgeo file:

###
# File: ossimrc-osgeo
###

###
# ANT
###
ANT_HOME=/usr/share/ant

###
# Java
###
JAVA_HOME=/usr/lib/jvm/java

dev=/work/osgeo
OSSIM_DEPENDENCIES=${dev}/local
OSSIM_DEV_HOME=${dev}
OSSIM_HOME=${dev}/ossim
OSSIM_INSTALL_PREFIX=${dev}/local
OSSIM_PREFS_FILE=${HOME}/ossim-prefs-osgeo

LD_LIBRARY_PATH=${OSSIM_DEV_HOME}/build/lib:${OSSIM_DEV_HOME}/ossim_qt/lib:${OSSIM_DEV_HOME}/openjpeg:${OSSIM_DEV_HOME}/Lidar_DSDK/lib:${OSSIM_DEV_HOME}/Raster_DSDK/lib:${OSSIM_DEV_HOME}/local/lib64:${OSSIM_DEV_HOME}/local/lib

PATH=${HOME}/bin:${OSSIM_DEV_HOME}/build/bin:${OSSIM_DEV_HOME}/local/bin:${OSSIM_DEV_HOME}/openjpeg/codec:${dev}/kakadu/latest/bin/Linux-x86-64-gcc:${PATH}:/usr/sbin:/sbin

export ANT_HOME JAVA_HOME LD_LIBRARY_PATH OSSIM_DEPENDENCIES OSSIM_DEV_HOME OSSIM_HOME OSSIM_INSTALL_PREFIX OSSIM_PREFS_FILE PATH

###
# Set the title so we know we're running osgeo code.:
###
PROMPT_COMMAND='echo -ne "\033]0;osgeo4: ${PWD}\007"'

Make a workspace:
Top level:
$ mkdir /work/osgeo
ossim build dir:
$ mkdir /work/osgeo/build
Sandbox for 3rd party dependencies:
$mkdir /work/osgeo/local

Building

To build the osgeo side:

I have files that I source. One for osgeo one for geoeye. So I can source one or the other and then build and test code. So in my bash start up scripts I start with no ossim stuff set. Since we're building osgeo I do:

cd to home
$ cd

Source my osgeo setup file. This sets OSSIM_HOME, OSSIM_PREFS_FILE and so on. File contents at end:
$ . ossimrc-osgeo

$ cd /work/osgeo

Make the directory(sandbox) for 3rd party dependencies:
$ mkdir local

First time through check out code. Note I don't like to check out the whole trunk so I do pieces.

I always build geos, libtiff, geotiff, gdal from the latest. You don't have to, it's up to you. Most of these you can get from yum but I find the code is usually way behind.

NOTE: Things I build with cmake I use an "out of source" build so I put in a sub directory of the package.

geos:
$ mkdir /work/osgeo/geos
$ cd !$ last argument of last command
$ svn co ​http://svn.osgeo.org/geos/trunk geos-svn
$ mkdir build "out of source" build dir
$ cd build
Make a cmake config script
$ xemacs geos-cmake-config.sh Use whatever editor you want, gedit, whatever...
Contents of script:

#!/bin/sh

# ---
# File: geos-cmake-config.sh
# ---

build_dir="/work/osgeo";

cmake -G "Unix Makefiles" \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=${build_dir}/local \
-DCMAKE_MODULE_PATH=${build_dir}/geos/geos-svn/cmake/modules \
../geos-svn

Make the script executable:
$ chmod 755 geos-cmake-config.sh

Run the cmake command to set up the build system:
$ ./geos-cmake-config.sh

Make - note the "-j 4" is to use 4 threads.
$ make -j 4

Install to sandbox:
$ make install Note if your sandbox was on a system slice, i.e. /usr/local you would do: "sudo make install"

End of GEOS

libtiff:
$ cd /work/osgeo
$ cvs -d :pserver:cvsanon@cvs.maptools.org:/cvs/maptools/cvsroot co libtiff
$ cd libtiff
Make a configure script
$ xemacs mylibtiffconfig.sh
Contents of script:

#!/bin/sh

# File: mylibtiffconfig.sh
prefix=/work/osgeo/local

./configure --prefix=${prefix}

Make the script executable:
$ chmod 755 mylibtiffconfig.sh

Run the cmake command to set up the build system:
$ ./mylibtiffconfig.sh

Make - note the "-j 4" is to use 4 threads.
$ make -j 4

Install to sandbox:
$ make install Note if your sandbox was on a system slice, i.e. /usr/local you would do: "sudo make install"

End of libtiff

geotiff:

At this point we will need ossim_package_support module so get it:
$ cd /work/osgeo
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim_package_support ossim_package_support

$ mkdir /work/osgeo/geotiff
$ cd !$
$ svn co ​http://svn.osgeo.org/metacrs/geotiff/trunk/libgeotiff libgeotiff
$ mkdir build "out of source" build dir
$ cd build
Make a cmake config script
Note my config tell libgeotif to use my libtiff NOT the system libtiff.
$ xemacs libgeotiff-cmake-config.sh Use whatever editor you want, gedit, whatever...
Contents of script:

#!/bin/sh

# File: libgeotiff-cmake-config.sh

build_dir="/work/osgeo";

cmake -G "Unix Makefiles" \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INCLUDE_PATH=${build_dir}/local/include \
-DCMAKE_INSTALL_PREFIX=${build_dir}/local \
-DCMAKE_LIBRARY_PATH=${build_dir}/local/lib \
-DCMAKE_MODULE_PATH=${build_dir}/ossim_package_support/cmake/CMakeModules \
-DGEOTIFF_ENABLE_INCODE_EPSG=ON \
-DWITH_JPEG=ON \
-DWITH_PROJ4=ON \
-DWITH_TIFF=ON \
-DWITH_ZLIB=ON \
../libgeotiff/

Make the script executable:
$ chmod 755 libgeotiff-cmake-config.sh

Run the cmake command to set up the build system:
$ ./libgeotiff-cmake-config.sh

Make - note the "-j 4" is to use 4 threads.
$ make -j 4

Install to sandbox:
$ make install Note if your sandbox was on a system slice, i.e. /usr/local you would do: "sudo make install"

End of geotiff

kakadu:
---
Not required but nice to have. Can be used by both ossim and gdal.
Note you need jni.h and JAVA_HOME environment variable so that that the make picks it up.
jni.h is in openjdk-devel package mine is "java-1.6.0-openjdk-devel.x86_64"
To install do "sudo yum install java-1.6.0-openjdk-devel.x86_64" JAVA_HOME is set to:
---

$ env | grep JAVA
JAVA_HOME=/usr/lib/jvm/java

$ mkdir kakadu
Copy your kakadu zip file.
$ cd kakadu
$ unzip v6_4-00367C.zip
$ cd v6_4-00367C/make
Choose the make file that matches your build:
$ make -f Makefile-Linux-x86-64-gcc
Make a link
$ cd /work/osgeo/kakadu
$ ln -s v6_4-00367C latest
End of kakadu

gdal:
$ cd /work/osgeo
svn co ​http://svn.osgeo.org/gdal/trunk/gdal gdal
$ cd gdal
Make a configure script
$ xemacs mygdalconfig.sh
Contents of script:
Note the gdal configure can be quite lengthy. Edit as required.
This builds gdal with my libtiff and geotiff.
I had to remove "--with-geos" as their configure did not handle the "3.4.dev" version.

#!/bin/sh

# File: mygdalconfig.sh
# Note: Python needed for QGIS.

prefix=/work/osgeo/local

./configure --prefix=${prefix} --with-kakadu=/work/drb/kakadu/latest --with-libtiff=/work/osgeo/local --with-geotiff=/work/osgeo/local --with-mrsid=/work/drb/mrsid/Geo_DSDK-7.0.0.2167 --with-python

Make the script executable:
$ chmod 755 mygdalconfig.sh

Run the cmake command to set up the build system:
$ ./mygdalconfig.sh

Make - note the "-j 4" is to use 4 threads.
$ make -j 4

Install to sandbox:
$ make install Note if your sandbox was on a system slice, i.e. /usr/local you would do: "sudo make install"

End of gdal

ossim:
Note there's too much junk in the trunk so I usually pull individual modules:

Get the code:
$ cd /work/osgeo
$ svn co ​http://svn.osgeo.org/ossim/omar omar
$ svn co ​http://svn.osgeo.org/ossim/trunk/oms oms
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim ossim
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossimGui ossimGui
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim_jni ossimjni
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim_package_support ossim_package_support If you haven't already.
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim_plugins ossim_plugins
$ svn co ​http://svn.osgeo.org/ossim/trunk/ossim_qt ossim_qt
$ svn co ​http://svn.osgeo.org/ossim/trunk/libwms libwms

$ mkdir build "out of source" build dir
$ cd build
Make a cmake config script
$ xemacs ossim-cmake-config.sh Use whatever editor you want, gedit, whatever...
Contents of script:

#!/bin/sh

# File: ossim-cmake-config.sh

build_dir="/work/osgeo";

cmake -G "Unix Makefiles" \
-DBUILD_CSMAPI=OFF \
-DBUILD_LIBRARY_DIR=lib \
-DBUILD_OMS=ON \
-DBUILD_OSSIM=ON \
-DBUILD_OSSIM_PLUGIN=ON  \
-DBUILD_OSSIMCONTRIB_PLUGIN=OFF \
-DBUILD_OSSIMCSM_PLUGIN=OFF \
-DBUILD_OSSIMGEOPDF_PLUGIN=ON \
-DBUILD_OSSIMGDAL_PLUGIN=ON \
-DBUILD_OSSIMHDF_PLUGIN=OFF \
-DBUILD_OSSIMKAKADU_PLUGIN=ON \
-DBUILD_OSSIMKMLSUPEROVERLAY_PLUGIN=ON \
-DBUILD_OSSIMLAS_PLUGIN=ON \
-DBUILD_OSSIMLIBLAS_PLUGIN=ON \
-DBUILD_OSSIMLIBRAW_PLUGIN=ON \
-DBUILD_OSSIMMRSID_PLUGIN=ON \
-DBUILD_OSSIMNDF_PLUGIN=ON \
-DBUILD_OSSIMNUI_PLUGIN=OFF \
-DBUILD_OSSIMOPENJPEG_PLUGIN=ON \
-DBUILD_OSSIMPNG_PLUGIN=ON \
-DBUILD_OSSIMREGISTRATION_PLUGIN=ON \
-DBUILD_OSSIMQT4=ON \
-DBUILD_OSSIMGUI=ON \
-DBUILD_OSSIM_MPI_SUPPORT=OFF \
-DBUILD_OSSIMPLANET=OFF \
-DBUILD_OSSIMPLANETQT=OFF \
-DBUILD_OSSIMPREDATOR=ON \
-DBUILD_OSSIM_TEST_APPS=ON \
-DBUILD_RUNTIME_DIR=bin \
-DBUILD_SHARED_LIBS=ON \
-DBUILD_WMS=ON \
-DCMAKE_BUILD_TYPE=Debug \
-DCMAKE_INCLUDE_PATH=${build_dir}/local/include \
-DCMAKE_INSTALL_PREFIX=${build_dir}/local \
-DCMAKE_LIBRARY_PATH=${build_dir}/local/lib \
-DCMAKE_MODULE_PATH=${build_dir}/ossim_package_support/cmake/CMakeModules \
-DKAKADU_ROOT_SRC=/work/drb/kakadu/latest \
-DKAKADU_AUX_LIBRARY=${build_dir}/local/lib64/libkdu_a64R.so \
-DKAKADU_LIBRARY=${build_dir}/local/lib64/libkdu_v64R.so  \
-DMRSID_DIR=${build_dir}/mrsid \
-DOSSIM_BUILD_ADDITIONAL_DIRECTORIES="${build_dir}/ossimjni" \
-DOSSIM_COMPILE_WITH_FULL_WARNING=ON \
-DOSSIM_DEPENDENCIES=${build_dir}/local \
-DOSSIM_DEV_HOME=${build_dir} \
-DOSSIM_INSTALL_PLUGINS_WITH_VERSION=OFF \
-DOSSIM_LIBRARIES=${build_dir}/build/lib/libossim.so \
-DOSSIM_PLUGIN_LINK_TYPE=MODULE \
-DOSSIMPLANET_ENABLE_EPHEMERIS=ON \
../ossim_package_support/cmake/

Make the script executable:
$ chmod 755 ossim-cmake-config.sh

Run the cmake command to set up the build system:
$ ./ossim-cmake-config.sh

Make - note the "-j 4" is to use 4 threads.
$ make -j 4

---
I usually do not do a make install on mine because I develop out of it.
---

End of ossim

That's it!!!

---
If everything built and your environment is set up correct, i.e. PATH and LD_LIBRARY_PATH you should have all the libtiff, geotiff, gdal, and ossim applications including: "imagelinker", "iview", "ossim-geocell".