Changes between Version 2 and Version 3 of TracInstall

Ignore:
Timestamp:
22 Apr 2015 15:34:51 (5 years ago)
Comment:

--

Legend:

Unmodified
 v2 = Trac Installation Guide for 0.11 = = Trac Installation Guide for 1.0 [[TracGuideToc]] Trac is written in the Python programming language and needs a database, [http://sqlite.org/ SQLite], [http://postgresql.org/ PostgreSQL], [http://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://genshi.edgewall.org Genshi] templating system. What follows are generic instructions for installing and setting up Trac and its requirements. While you can find instructions for installing Trac on specific systems at TracInstallPlatforms on the main Trac site, please be sure to '''first read through these general instructions''' to get a good understanding of the tasks involved. See TracUpgrade for instructions on how to upgrade an existing installation. == Quick Install a Released Version == For a quick install, first make sure you have [http://python.org/download Python] (2.3-2.6) and [http://peak.telecommunity.com/DevCenter/EasyInstall#installing-easy-install easy_install]. Then enter (''omitting 'sudo' if not applicable'') {{{ sudo easy_install Trac }}} to install Trac, SQLite, and Genshi. == Requirements == The hardware requirements for running Trac obviously depend on the expected data volume (number of wiki pages, tickets, revisions) and traffic. Very small projects will run fine with a 500MHz processor and 128MB RAM using SQLite. In general, the more RAM, the better. A fast hard disk also helps. Trac is written in the Python programming language and needs a database, [http://sqlite.org/ SQLite], [http://www.postgresql.org/ PostgreSQL], or [http://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://genshi.edgewall.org Genshi] templating system. Since version 0.12, Trac can also be localized, and there is probably a translation available in your language. If you want to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default English version. If you're interested in contributing new translations for other languages or enhancing the existing translations, then please have a look at [trac:wiki:TracL10N TracL10N]. What follows are generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms] on the main Trac site, please '''first read through these general instructions''' to get a good understanding of the tasks involved. [[PageOutline(2-3,Installation Steps,inline)]] == Dependencies === Mandatory Dependencies To install Trac, the following software packages must be installed: * [http://www.python.org/ Python], version >=2.3 (<3.0) * if using mod_python together with xml-related things, use python-2.5. expat is namespaced there and does not cause apache to crash any more(see [http://www.dscpl.com.au/wiki/ModPython/Articles/ExpatCausingApacheCrash here] for details). * For RPM-based systems you might also need the python-devel and python-xml packages. * See instructions in [trac:wiki:TracOnWindows/Python2.5 TracOnWindows/Python2.5] * [wiki:setuptools], version >= 0.6 * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.5 (was version >= 0.4.1 on previous 0.11 release candidates) * You also need a database system and the corresponding python drivers for it. The database can be either SQLite, PostgreSQL or MySQL. * Optional if some plugins require it: [http://www.clearsilver.net/ ClearSilver] ==== For SQLite ==== If you're using Python 2.5 or 2.6, you already have everything you need. If you're using Python 2.3 or 2.4 and need pysqlite, you can download from [http://code.google.com/p/pysqlite/downloads/list google code] the Windows installers or the tar.gz archive for building from source: {{{ $tar xvfz .tar.gz$ cd $python setup.py build_static install }}} That way, the latest SQLite version will be downloaded and built into the bindings. If you're still using SQLite 2.x, you'll need pysqlite 1.0.x, although this package is not easy to find anymore. For SQLite 3.x, try not to use pysqlite 1.1.x, which has been deprecated in favor of pysqlite 2.x. See additional information in [trac:PySqlite PySqlite]. ==== For PostgreSQL ==== * [http://www.postgresql.org/ PostgreSQL] * [http://initd.org/projects/psycopg2 psycopg2] * See [trac:wiki:DatabaseBackend#Postgresql DatabaseBackend] '''Warning''': PostgreSQL 8.3 uses a strict type checking mechanism. To use Trac with the 8.3 Version of PostgreSQL, you will need [http://trac.edgewall.org/changeset/6512 trac-0.11] or later. ==== For MySQL ==== * [http://mysql.com/ MySQL], version 4.1 or later ([http://askmonty.org/wiki/index.php/MariaDB MariaDB] might work as well) * [http://sf.net/projects/mysql-python MySQLdb], version 1.2.1 or later See [trac:MySqlDb MySqlDb] for more detailed information. It is ''very'' important to read carefully that page before creating the database. == Optional Requirements == ==== Version Control System ==== '''Please note:''' if using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently not supported (although Windows UNC paths such as {{{\\machine_name\path\to\svn}}} do work). * [http://subversion.tigris.org/ Subversion], version >= 1.0. (versions recommended: 1.2.4, 1.3.2 or 1.4.2) and the '''''corresponding''''' Python bindings. For troubleshooting, check [trac:TracSubversion TracSubversion] * Trac uses the [http://svnbook.red-bean.com/svnbook-1.1/ch08s02.html#svn-ch-8-sect-2.3 SWIG] bindings included in the Subversion distribution, '''not''' [http://pysvn.tigris.org/ PySVN] (which is sometimes confused with the standard SWIG bindings). * If Subversion was already installed without the SWIG bindings, on Unix you'll need to re-configure Subversion and make swig-py, make install-swig-py. * There are [http://subversion.tigris.org/servlets/ProjectDocumentList?folderID=91 pre-compiled bindings] available for win32. * Support for other version control systems is provided via third-parties. See [trac:PluginList PluginList] and [trac:VersioningSystemBackend VersioningSystemBackend]. ==== Web Server ==== * A CGI-capable web server (see TracCgi), or * a [http://www.fastcgi.com/ FastCGI]-capable web server (see TracFastCgi), or * an [http://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp]), or * [http://httpd.apache.org/ Apache] with [http://code.google.com/p/modwsgi/ mod_wsgi] (see [wiki:TracModWSGI] or http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac) or * This should work with Apache 1.3, 2.0 or 2.2 and promises to deliver more performance than using mod_python. A little less mature than mod_python. * [http://httpd.apache.org/ Apache] with [http://www.modpython.org/ mod_python 3.1.3+] (see TracModPython) * When installing mod_python the development versions of Python and Apache are required (actually the libraries and header files) For those stuck with Apache 1.3, it is also possible to get Trac working with [http://www.modpython.org/ mod_python 2.7] (see [trac:wiki:TracModPython2.7 TracModPython2.7]). This guide hasn't been updated since 0.84, so it may or may not work. ==== Other Python Utilities ==== * [http://docutils.sourceforge.net/ docutils], version >= 0.3.9 for WikiRestructuredText. * [http://pygments.pocoo.org Pygments] for '''syntax highlighting''', although [http://silvercity.sourceforge.net/ SilverCity] >= 0.9.7 and/or [http://gnu.org/software/enscript/enscript.html GNU Enscript] are also possible. Refer to TracSyntaxColoring for details. * [http://pytz.sf.net pytz] to get a complete list of time zones, otherwise Trac will fall back on a shorter list from an internal time zone implementation. '''Attention''': The various available versions of these dependencies are not necessarily interchangable, so please pay attention to the version numbers above. If you are having trouble getting Trac to work please double-check all the dependencies before asking for help on the [trac:MailingList MailingList] or [trac:IrcChannel IrcChannel]. Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing'' (there are even some pages that are still talking about Trac 0.8!). == Installing Trac == One way to install Trac is using setuptools. With setuptools you can install Trac from the subversion repository; for example, to install release version 0.11 do: {{{ easy_install http://svn.edgewall.org/repos/trac/tags/trac-0.11 }}} But of course the python-typical setup at the top of the source directory also works: {{{ * [http://www.python.org/ Python], version >= 2.5 and < 3.0 (note that we dropped the support for Python 2.4 in this release) * [http://pypi.python.org/pypi/setuptools setuptools], version >= 0.6 * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.6 You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL. ==== For the SQLite database #ForSQLite As you must be using Python 2.5, 2.6 or 2.7, you already have the SQLite database bindings bundled with the standard distribution of Python: the sqlite3 module. Optionally, you may install a newer version of [pypi:pysqlite pysqlite] than the one provided by the Python distribution. See [trac:PySqlite#ThePysqlite2bindings PySqlite] for details. ==== For the PostgreSQL database #ForPostgreSQL You need to install the database and its Python bindings: * [http://www.postgresql.org/ PostgreSQL], version 8.0 or later * [http://pypi.python.org/pypi/psycopg2 psycopg2], version 2.0 or later See [trac:DatabaseBackend#Postgresql DatabaseBackend] for details. ==== For the MySQL database #ForMySQL Trac works well with MySQL, provided you follow the guidelines: * [http://mysql.com/ MySQL], version 5.0 or later * [http://sf.net/projects/mysql-python MySQLdb], version 1.2.2 or later Given the caveats and known issues surrounding MySQL, read carefully the [trac:MySqlDb] page before creating the database. === Optional Dependencies ==== Version Control System ===== Subversion * [http://subversion.apache.org/ Subversion], 1.5.x or later and the '''''corresponding''''' Python bindings. Older versions starting from 1.0, like 1.2.4, 1.3.2 or 1.4.2, etc. may still work. For troubleshooting information, check the [trac:TracSubversion#Troubleshooting TracSubversion] page. There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. [trac:TracSubversion] points you to [http://alagazam.net Alagazam], which works for me under Python 2.6.) Note that Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], neither does it work yet with the newer ctype-style bindings. '''Please note:''' if using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported]. ===== Git * [http://git-scm.com/ Git] 1.5.6 or later. More information is available on the [trac:TracGit] page. ===== Others Support for other version control systems is provided via third-parties. See [trac:PluginList#VersionControlSystems] and [trac:VersionControlSystem]. ==== Web Server A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server] section below. Alternatively you can configure Trac to run in any of the following environments: * [http://httpd.apache.org/ Apache] with - [http://code.google.com/p/modwsgi/ mod_wsgi], see [wiki:TracModWSGI] and http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac - [http://modpython.org/ mod_python 3.5.0], see TracModPython * a [http://www.fastcgi.com/ FastCGI]-capable web server (see TracFastCgi) * an [http://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp]) * a FastCGI and FastCGI-to-WSGI gateway (see [trac:TracOnWindowsIisWfastcgi]) * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script is highly discouraged''', better use one of the previous options. ==== Other Python Packages * [http://babel.edgewall.org Babel], version 0.9.5, 0.9.6 or >= 1.3 needed for localization support * [http://docutils.sourceforge.net/ docutils], version >= 0.3.9 for WikiRestructuredText. * [http://pygments.org Pygments] for [TracSyntaxColoring syntax highlighting]. [http://silvercity.sourceforge.net/ SilverCity] and/or [http://gnu.org/software/enscript/enscript.html Enscript] may still be used but are deprecated and you really should be using Pygments. * [http://pytz.sf.net pytz] to get a complete list of time zones, otherwise Trac will fall back on a shorter list from an internal time zone implementation. {{{#!div style="border: 1pt dotted; margin: 1em" **Attention**: The available versions of these dependencies are not necessarily interchangeable, so please pay attention to the version numbers. If you are having trouble getting Trac to work, please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel]. }}} Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing''. == Installing Trac The [TracAdmin trac-admin] command-line tool, used to create and maintain [TracEnvironment project environments], as well as the [TracStandalone tracd] standalone server are installed along with Trac. There are several methods for installing Trac. === Using easy_install Trac can be installed from PyPI or the Subversion repository using [http://pypi.python.org/pypi/setuptools setuptools]. A few examples: - Install Trac 1.0: {{{#!sh easy_install Trac==1.0 }}} - Install latest development version: {{{#!sh easy_install Trac==dev }}} Note that in this case you won't have the possibility to run a localized version of Trac; either use a released version or install from source More information can be found on the [trac:setuptools] page. {{{#!div style="border: 1pt dotted; margin: 1em" **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable PKG_RESOURCES_CACHE_ZIP_MANIFESTS must be set in order to avoid significant performance degradation. More information may be found in the sections on [#RunningtheStandaloneServer Running The Standalone Server] and [#RunningTraconaWebServer Running Trac on a Web Server]. }}} === Using pip 'pip' is an easy_install replacement that is very useful to quickly install python packages. To get a Trac installation up and running in less than 5 minutes: Assuming you want to have your entire pip installation in /opt/user/trac - {{{#!sh pip install trac psycopg2 }}} or - {{{#!sh pip install trac mysql-python }}} Make sure your OS specific headers are available for pip to automatically build PostgreSQL (libpq-dev) or MySQL (libmysqlclient-dev) bindings. pip will automatically resolve all dependencies (like Genshi, pygments, etc.), download the latest packages from pypi.python.org and create a self contained installation in /opt/user/trac. All commands (tracd, trac-admin) are available in /opt/user/trac/bin. This can also be leveraged for mod_python (using PythonHandler directive) and mod_wsgi (using WSGIDaemonProcess directive) Additionally, you can install several Trac plugins (listed [https://pypi.python.org/pypi?:action=browse&show=all&c=516 here]) through pip. === From source Using the python-typical setup at the top of the source directory also works. You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. Trac-1.0.tar.gz) from the [trac:TracDownload] page, or you can get the source directly from the repository. See [trac:TracRepositories#OfficialSubversionrepository TracRepositories] for details. {{{#!sh$ python ./setup.py install }}} ''Note: you'll need root permissions or equivalent for this step.'' This will byte-compile the python source code and install it as an .egg file or folder in the site-packages directory of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates. The script will also install the [wiki:TracAdmin trac-admin] command-line tool, used to create and maintain [wiki:TracEnvironment project environments], as well as the [wiki:TracStandalone tracd] standalone server. ==== Advanced Options ==== ''You will need root permissions or equivalent for this step.'' This will byte-compile the Python source code and install it as an .egg file or folder in the site-packages directory of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates. If you install from source and want to make Trac available in other languages, make sure Babel is installed. Only then, perform the install (or simply redo the install once again afterwards if you realize Babel was not yet installed): {{{#!sh $python ./setup.py install }}} Alternatively, you can run bdist_egg and copy the .egg from dist/ to the place of your choice, or you can create a Windows installer (bdist_wininst). === Using installer On Windows Trac can be installed using the exe installers available on the [trac:TracDownload] page. Installers are available for the 32 and 64 bit versions of Python. Make sure to use the installer that matches the architecture of your Python installation. === Using package manager Trac may be available in the package repository for your platform. Note however, that the version provided by the package manager may not be the latest release. === Advanced easy_install Options To install Trac to a custom location, or find out about other advanced installation options, run: {{{ {{{#!sh easy_install --help }}} Also see [http://docs.python.org/inst/inst.html Installing Python Modules] for detailed information. Also see [http://docs.python.org/2/install/index.html Installing Python Modules] for detailed information. Specifically, you might be interested in: {{{ {{{#!sh easy_install --prefix=/path/to/installdir }}} or, if installing Trac to a Mac OS X system: {{{ or, if installing Trac on a Mac OS X system: {{{#!sh easy_install --prefix=/usr/local --install-dir=/Library/Python/2.5/site-packages }}} Note: If installing on Mac OS X 10.6 running {{{ easy_install http://svn.edgewall.org/repos/trac/trunk }}} will install into {{{ /usr/local }}} and {{{ /Library/Python/2.5/site-packages }}} by default. The above will place your tracd and trac-admin commands into /usr/local/bin and will install the Trac libraries and dependencies into /Library/Python/2.5/site-packages, which is Apple's preferred location for third-party Python application installations. == Creating a Project Environment == A [wiki:TracEnvironment Trac environment] is the backend storage where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is basically a directory that contains a human-readable configuration file and various other files and directories. A new environment is created using [wiki:TracAdmin trac-admin]: {{{ == Creating a Project Environment A [TracEnvironment Trac environment] is the backend where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is basically a directory that contains a human-readable [TracIni configuration file], and other files and directories. A new environment is created using [TracAdmin trac-admin]: {{{#!sh$ trac-admin /path/to/myproject initenv }}} [wiki:TracAdmin trac-admin] will prompt you for the information it needs to create the environment, such as the name of the project, the type and the path to an existing [wiki:TracEnvironment#SourceCodeRepository source code repository], the [wiki:TracEnvironment#DatabaseConnectionStrings database connection string], and so on. If you're not sure what to specify for one of these options, just leave it blank to use the default value. The database connection string in particular will always work as long as you have SQLite installed. Leaving the path to the source code repository empty will disable any functionality related to version control, but you can always add that back when the basic system is running. Also note that the values you specify here can be changed later by directly editing the [wiki:TracIni] configuration file. ''Note: The user account under which the web server runs will require write permissions to the environment directory and all the files inside.  On Linux, with the web server running as user apache and group apache, enter:'' chown -R apache.apache /path/to/myproject == Running the Standalone Server == After having created a Trac environment, you can easily try the web interface by running the standalone server [wiki:TracStandalone tracd]: {{{ [TracAdmin trac-admin] will prompt you for the information it needs to create the environment, such as the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for one of these options, just press  to use the default value. Using the default database connection string in particular will always work as long as you have SQLite installed. For the other [trac:DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point. Since 0.12, Trac doesn't ask for a [TracEnvironment#SourceCodeRepository source code repository] anymore when creating an environment. Repositories can be [TracRepositoryAdmin added] afterwards, and support for specific version control systems is disabled by default. Also note that the values you specify here can be changed later by directly editing the [TracIni conf/trac.ini] configuration file. {{{#!div style="border: 1pt dotted; margin: 1em" **Filesystem Warning:** When selecting the location of your environment, make sure that the filesystem on which the environment directory resides supports sub-second timestamps (i.e. **not** ext2 or ext3 on Linux), as the modification time of the conf/trac.ini file will be monitored to decide whether an environment restart is needed or not. A too coarse-grained timestamp resolution may result in inconsistencies in Trac < 1.0.2. The best advice is to opt for a platform with sub-second timestamp resolution, regardless of the Trac version. }}} Finally, make sure the user account under which the web front-end runs will have '''write permissions''' to the environment directory and all the files inside. This will be the case if you run trac-admin ... initenv as this user. If not, you should set the correct user afterwards. For example on Linux, with the web server running as user apache and group apache, enter: {{{#!sh $chown -R apache.apache /path/to/myproject }}} The actual username and groupname of the apache server may not be exactly apache, and are specified in the Apache configuration file by the directives User and Group (if Apache httpd is what you use). {{{#!div class=important '''Warning:''' Please only use ASCII-characters for account name and project path, unicode characters are not supported there. }}} == Deploying Trac === Running the Standalone Server After having created a Trac environment, you can easily try the web interface by running the standalone server [TracStandalone tracd]: {{{#!sh$ tracd --port 8000 /path/to/myproject }}} Then, fire up a browser and visit http://localhost:8000/. You should get a simple listing of all environments that tracd knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with trac you can have the standalone server skip the environment list by starting it like this: {{{ Then, fire up a browser and visit http://localhost:8000/. You should get a simple listing of all environments that tracd knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with Trac you can have the standalone server skip the environment list by starting it like this: {{{#!sh $tracd -s --port 8000 /path/to/myproject }}} == Running Trac on a Web Server == Trac provides three options for connecting to a "real" web server: [wiki:TracCgi CGI], [wiki:TracFastCgi FastCGI] and [wiki:TracModPython mod_python]. For decent performance, it is recommended that you use either FastCGI or mod_python. If you're not afraid of running newer code, you can also try running Trac on [wiki:TracModWSGI mod_wsgi]. This should deliver even better performance than mod_python, but the module isn't as extensively tested as mod_python. Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS. ==== Generating the Trac cgi-bin directory ==== In order for Trac to function properly with FastCGI or mod_python, you need to have a trac.cgi file. This is an executable which loads the appropriate Python code. It can be generated using the deploy option of [wiki:TracAdmin trac-admin]. There is, however, a bit of a chicken-and-egg problem. The [wiki:TracAdmin trac-admin] command requires an existing environment to function, but complains if the deploy directory already exists. This is a problem, because environments are often stored in a subdirectory of the deploy. The solution is to do something like this: {{{ {{{#!div style="border: 1pt dotted; margin: 1em" **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable PKG_RESOURCES_CACHE_ZIP_MANIFESTS must be set in order to avoid significant performance degradation. The environment variable can be set system-wide, or for just the user that runs the tracd process. There are several ways to accomplish this in addition to what is discussed here, and depending on the distribution of your OS. To be effective system-wide a shell script with the export statement may be added to /etc/profile.d. To be effective for a user session the export statement may be added to ~/.profile. {{{#!sh export PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 }}} Alternatively, the variable can be set in the shell before executing tracd: {{{#!sh$ PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 tracd --port 8000 /path/to/myproject }}} }}} === Running Trac on a Web Server Trac provides various options for connecting to a "real" web server: - [TracFastCgi FastCGI] - [wiki:TracModWSGI mod_wsgi] - [TracModPython mod_python] - //[TracCgi CGI] (should not be used, as the performance is far from optimal)// Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS. Other deployment scenarios are possible: [trac:TracNginxRecipe nginx], [http://projects.unbit.it/uwsgi/wiki/Example#Traconapacheinasub-uri uwsgi], [trac:TracOnWindowsIisIsapi Isapi-wsgi] etc. ==== Generating the Trac cgi-bin directory #cgi-bin In order for Trac to function properly with FastCGI you need to have a trac.fcgi file and for mod_wsgi a trac.wsgi file. These are Python scripts which load the appropriate Python code. They can be generated using the deploy option of [TracAdmin trac-admin]. There is, however, a bit of a chicken-and-egg problem. The [TracAdmin trac-admin] command requires an existing environment to function, but complains if the deploy directory already exists. This is a problem, because environments are often stored in a subdirectory of the deploy. The solution is to do something like this: {{{#!sh mkdir -p /usr/share/trac/projects/my-project trac-admin /usr/share/trac/projects/my-project initenv mv /tmp/deploy/* /usr/share/trac }}} ==== Setting up the Plugin Cache ==== Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions. == Configuring Authentication == The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. The basic procedure is described in the [wiki:TracCgi#AddingAuthentication "Adding Authentication"] section on the TracCgi page. To learn how to setup authentication for the frontend you're using, please refer to one of the following pages: * TracStandalone if you use the standalone server, tracd. * TracCgi if you use the CGI or FastCGI methods. * TracModPython if you use the mod_python method. == Automatic reference to the SVN changesets in Trac tickets == You can configure SVN to automatically add a reference to the changeset into the ticket comments, whenever files are committed to the repository. The description of the commit needs to contain one of the following formulas: * '''Refs #123''' - to reference this changeset in #123 ticket * '''Fixes #123''' - to reference this changeset and close #123 ticket with the default status ''fixed'' All you have to do is to edit the ''post-commit'' hook in your SVN repository and make it execute ''trac-post-commit-hook'' coming with Trac. If you are editing the ''post-commit'' hook for the first time you need to navigate to your SVN repository's hooks subfolder and rename existing there ''post-commit'' template: {{{ $cd /path/to/svn/repository/hooks$ mv post-commit.tmpl post-commit $chmod 755 post-commit }}} Next open it in any text editor and add a line with path to the Trac environment connected with this SVN repository and another line executing the ''trac-post-commit-hook'' script: {{{ REPOS="$1" REV="$2" TRAC_ENV="/path/to/your/trac/project" /usr/bin/python /usr/local/bin/trac-post-commit-hook -p "$TRAC_ENV" -r "$REV" }}} Make sure that ''trac-post-commit-hook'' exists in above path with execution permissions for the same user which SVN is running from. This script can be found in contrib subfolder of your Trac distribution and the latest version can be always downloaded from [source:trunk/contrib/trac-post-commit-hook]. == Platform-specifics installations == * See [trac:TracInstallPlatforms TracInstallPlatforms] == Using Trac == Once you have your Trac site up and running, you should be able to browse your subversion repository, create tickets, view the timeline, etc. Keep in mind that anonymous (not logged in) users can by default access most but not all of the features. You will need to configure authentication and grant additional [wiki:TracPermissions permissions] to authenticated users to see the full set of features. Don't forget to check that the web server has the execution right on scripts in the /usr/share/trac/cgi-bin directory. ==== Mapping Static Resources Out of the box, Trac will pass static resources such as style sheets or images through itself. For anything but a tracd only based deployment, this is far from optimal as the web server could be set up to directly serve those static resources (for CGI setup, this is '''highly undesirable''' and will cause abysmal performance). Web servers such as [http://httpd.apache.org/ Apache] allow you to create “Aliases” to resources, giving them a virtual URL that doesn't necessarily reflect the layout of the servers file system. We also can map requests for static resources directly to the directory on the file system, avoiding processing these requests by Trac itself. There are two primary URL paths for static resources - /chrome/common and /chrome/site. Plugins can add their own resources, usually accessible by /chrome/ path, so its important to override only known paths and not try to make universal /chrome alias for everything. Note that in order to get those static resources on the filesystem, you need first to extract the relevant resources from Trac using the [TracAdmin trac-admin] deploy command: [[TracAdminHelp(deploy)]] The target  will then contain an htdocs directory with: - site/ - a copy of the environment's directory htdocs/ - common/ - the static resources of Trac itself - / - one directory for each resource directory managed by the plugins enabled for this environment ===== Example: Apache and ScriptAlias #ScriptAlias-example Assuming the deployment has been done this way: {{{#!sh$ trac-admin /var/trac/env deploy /path/to/shared/trac }}} Add the following snippet to Apache configuration ''before'' the ScriptAlias or WSGIScriptAlias (which map all the other requests to the Trac application), changing paths to match your deployment: {{{#!apache Alias /trac/chrome/common /path/to/trac/htdocs/common Alias /trac/chrome/site /path/to/trac/htdocs/site Order allow,deny Allow from all }}} If using mod_python, you might want to add this too (otherwise, the alias will be ignored): {{{#!apache SetHandler None }}} Note that we mapped /trac part of the URL to the trac.*cgi script, and the path /trac/chrome/common is the path you have to append to that location to intercept requests to the static resources. Similarly, if you have static resources in a project's htdocs directory (which is referenced by /trac/chrome/site URL in themes), you can configure Apache to serve those resources (again, put this ''before'' the ScriptAlias or WSGIScriptAlias for the .*cgi scripts, and adjust names and locations to match your installation): {{{#!apache Alias /trac/chrome/site /path/to/projectenv/htdocs Order allow,deny Allow from all }}} Alternatively to aliasing /trac/chrome/common, you can tell Trac to generate direct links for those static resources (and only those), using the [[TracIni#trac-section| [trac] htdocs_location]] configuration setting: {{{#!ini [trac] htdocs_location = http://static.example.org/trac-common/ }}} Note that this makes it easy to have a dedicated domain serve those static resources (preferentially [http://code.google.com/speed/page-speed/docs/request.html#ServeFromCookielessDomain cookie-less]). Of course, you still need to make the Trac htdocs/common directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server: {{{#!sh $ln -s /path/to/trac/htdocs/common /var/www/static.example.org/trac-common }}} ==== Setting up the Plugin Cache Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions on how to set environment variables. == Configuring Authentication Trac uses HTTP authentication. You'll need to configure your webserver to request authentication when the .../login URL is hit (the virtual path of the "login" button). Trac will automatically pick the REMOTE_USER variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info. The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. Please refer to one of the following sections: * TracStandalone#UsingAuthentication if you use the standalone server, tracd. * [wiki:TracModWSGI#ConfiguringAuthentication TracModWSGI#ConfiguringAuthentication] if you use the Apache web server, with any of its front end: mod_wsgi of course, but the same instructions applies also for mod_python, mod_fcgi or mod_fastcgi. * TracFastCgi if you're using another web server with FCGI support (Cherokee, Lighttpd, !LiteSpeed, nginx) The following document also contains some useful information for beginners: [trac:TracAuthenticationIntroduction]. == Granting admin rights to the admin user Grant admin rights to user admin: {{{#!sh$ trac-admin /path/to/myproject permission add admin TRAC_ADMIN }}} This user will have an "Admin" entry menu that will allow you to administrate your Trac project. == Finishing the install === Enable version control components Support for version control systems is provided by optional components in Trac and the components are disabled by default //(since 1.0)//. Subversion and Git must be explicitly enabled if you wish to use them. See TracRepositoryAdmin for more details. The version control systems are enabled by adding the following to the [components] section of your [TracIni#components-section trac.ini], or enabling the components in the "Plugins" admin panel. {{{#!ini tracopt.versioncontrol.svn.* = enabled }}} {{{#!ini tracopt.versioncontrol.git.* = enabled }}} After enabling the components, repositories can be configured through the //Repositories// admin panel or by editing [TracIni#repositories-section trac.ini]. Automatic changeset references can be inserted as ticket comments by configuring [TracRepositoryAdmin#Automaticchangesetreferencesintickets CommitTicketUpdater]. === Using Trac Once you have your Trac site up and running, you should be able to create tickets, view the timeline, browse your version control repository if configured, etc. Keep in mind that //anonymous// (not logged in) users can by default access only a few of the features, in particular they will have a read-only access to the resources. You will need to configure authentication and grant additional [TracPermissions permissions] to authenticated users to see the full set of features. '' Enjoy! '' ---- See also: [trac:TracInstallPlatforms TracInstallPlatforms], TracGuide, TracCgi, TracFastCgi, TracModPython, [wiki:TracModWSGI], TracUpgrade, TracPermissions See also: [trac:TracInstallPlatforms TracInstallPlatforms], TracGuide, TracUpgrade, TracPermissions