These instructions allow you to install a version of !MapGuide Open Source 2.0 side by side with !MapGuide Open Source 1.2, using the bundled Apache install for both. Please note that this is '''NOT''' an officially supported configuration, and is to be used for testing purposes only. These instructions assume that you have already installed !MapGuide Open Source 1.2 following all defaults, using the Apache bundled configuration. == Install !MapGuide Server 2.0 == - Use all default options - The service will not start because of port conflicts with !MapGuide 1.2. To resolve this, go to {{{ C:\Program Files\MapGuideOpenSource2.0\Server\Bin }}} - Edit the serverconfig.ini file with the following changes {{{ [AdministrativeConnectionProperties] Port = 2820 [ClientConnectionProperties] Port = 2821 [SiteConnectionProperties] Port = 2822 }}} == Install !MapGuide Web Extensions 2.0 == - Use default options, except to specify port 8018 for the Apache port. You can change this after installation if you want, but it's easier to change during install. - The !ApacheMapGuide service will not install because it has the same name as an existing service. To fix this, perform the following steps - Open a command prompt - Change directory to {{{ C:\Program Files\!MapGuideOpenSource2.0\!WebServerExtensions\Apache2 }}} - Type: {{{ bin\httpd -k install -n "ApacheMapGuide2.0" net start ApacheMapGuide2.0 }}} - The server's port number in the !WebServerExtensions will be incorrect. To resolve this issue: - Navigate to {{{ C:\Program Files\MapGuideOpenSource2.0\WebServerExtensions\www }}} - Edit the webconfig.ini file as follows: {{{ [AdministrativeConnectionProperties] Port = 2820 [ClientConnectionProperties] Port = 2821 [SiteConnectionProperties] Port = 2822 }}}